The City of Sanford, Maine, is putting the final pieces of funding in place to move forward with its ambitious 45-mile fiber optic build, SandfordNet, the largest fiber infrastructure build proposed in Maine to date. 

Along with two other funding sources, the project will be financed by an existing Tax Increment Financing (TIF) district in downtown Sanford. According to the Journal Tribune, the project will cost $2.02 million in total to complete; that figure is higher than initially projected, due in part to fees to access utility poles. 

The SanfordNet project involves building what the city describes as a “fourth redundant ring” that will attach to the statewide fiber loop known as the “Three Ring Binder.” Sanford’s building out the 45 miles of fiber and then connecting it to the Binder, which is about nine miles beyond city limits. The fiber will connect nearly 90 Community Anchor Institutions (CAIs), such as libraries and hospitals, to the infrastructure that will offer 10 Gigabit per second symmetrical upload and download capacity. The city is utilizing an open access model, leasing out its fiber to ISPs in a non-discriminatory approach that promotes competition.

GWI of Biddeford, Maine, will operate the network for Sanford and intends to offer Fiber-to-the-Home (FTTH) to residential premises along the fiber route in areas where there's sufficient demand. The open access model will create the opportunity for competition, creating better rates and better services for Mainers in the region. For more on what has become known as the "Maine Model," check out Christopher's conversation with GWI's CEO Fletcher Kittredge, episode 214 of the Community Broadband Bits podcast.

Where the Project Stands

Nestled along the south eastern border of Maine are Baileyville and Calais. As rural communities situated next to Canada in the state's "Downeast" region, neither town is on a list of infrastructure upgrades from incumbents. With an aging population, a need to consider their economic future, and no hope of help from big national ISPs, Baileyville and Calais are joining forces and developing their own publicly owned broadband utility.

Baileyville and Calais

There are about 3,000 residents in Calais (pronounced "Kal-iss") and 1,500 in Baileyville, but according to Julie Jordan, Director of Downeast Economic Development Corporation (DEDC), many of those residents are aging and younger people find little reason to stay or relocate in Washington County. The community recognizes that they need to draw in new industries and jobs that will attract young families to keep the towns from fading off the map.

Most of the residents in the region must rely on slow DSL from Consolidated Communications (formerly FairPoint), while a few have access to cable from Spectrum (formerly Time Warner Cable); expensive and unreliable satellite is also an option and there's some limited fixed wireless coverage in the area. A few larger businesses that require fiber optic connectivity can find a way to have it installed, but Julie tells us that it's incredibly expensive in the area and most can't afford the high rates for fiber.

Economic Development Driven

Organized in 2015, the nonprofit DEDC came together with the focus on recruiting new businesses to the area and to support existing businesses. As DEDC quickly discovered, unless the region could offer high-speed, reliable Internet infrastructure, attracting new businesses and helping existing businesses expand would be extremely difficult. They also determined that new families would not be interested in Baileyville or Calais without high-quality connectivity. "It was a no-brainer," says Julie, "you have to go fiber."

With the best intentions, Kentucky announced in late 2014 that it would build out a statewide open access fiber optic network to at least one location in each county to encourage high-quality connectivity in both urban and rural communities. Hopes were high as rural residents and businesses that depended on DSL and dial-up envisioned connectivity to finally bring them into the 21st century. After almost three years and multiple issues that have negatively impacted the project, legislators and everyday folks are starting to wonder what's in store for the KentuckyWired project. 

Local Communities Are Best Suited To Deploy Community Networks

There is no one-size-fits-all method of deploying across a state filled with communities and landscapes as diverse as Kentucky. From the urban centers like Louisville and Lexington to the rocky, mountainous terrain in the southeastern Appalachian communities, demographics and geography vary widely. But most lack modern Internet access and local ISPs have found it hard to get affordable backhaul to connect to the rest of the Internet.

There are several municipal networks in Kentucky, some of which have operated for decades. In addition to Glasgow, Paducah, Bowling Green, Frankfort, and others, Owensboro is currently expanding a pilot project that proved popular. As our own Christopher Mitchell discussed at the Appalachia Connectivity Summit, several cooperatives have made major fiber-optic investments in the state.

When it comes to connecting residents and local businesses, we strongly believe local entities are the best choice. Local officials have a better sense of rights-of-way, the challenges of pole attachments, and the many other moving pieces that go into network investment. Projects with local support see fewer barriers - people are more willing to grant easements, for instance. 

This is the transcript for Episode 271 of the Community Broadband Bits Podcast. Research Associate Hannah Trostle takes over as host in order to quiz Christopher Mitchell on the latest developments in community networks. Listen to this episode here.

Christopher Mitchell: I can't believe we're freek'n talking about satellite again!

Lisa Gonzalez:This is Episode 271 of the community broadband bits podcast from the Institute for Local Self-Reliance. I'm Lisa Gonzalez. What do the FCC satellite internet access mobile broadband. Madison, Wisconsin, and utility poles in Louisville, Kentucky, have in common. They're all in the recent community broadband news and they're all in this week's podcast. In this episode, Research Associate Hannah Trostle boots Christopher from the host chair to interview him about some significant recent developments. For more details on these and other topics check out the appropriate tags at MuniNetworks.org. Now, here's Hannah and Christopher.

Hannah Trostle: Welcome to the Community Broadband Bits podcast. This is your host this week Hannah Trostle. Joining me is the normal host Christopher Mitchell.

Christopher Mitchell: I don't know how normal I am but thank you for having me on my show.

Hannah Trostle: Now we're going to kick you off, and I'm only going to do the podcast from now on.

Christopher Mitchell: I can't say I don't deserve it.

Hannah Trostle: Well you've been gone quite a bit. Where have you been?

Louisville has overcome a tall hurdle in its efforts to bring better connectivity and more competition to the community through local control. On August 16th the U.S. District Court for the Western District of Kentucky supported the city’s one touch make ready (OTMR) ordinance. AT&T challenged the ordinance in court, but their arguments fell flat and court confirmed that the city has the authority to manage its rights-of-way with OTMR.

State Law

AT&T’s claim based on state law asserted that the city was overstepping its authority by enacting the OTMR ordinance because it was impinging on Kentucky Public Service Commission jurisdiction. AT&T attorneys argued that, according to state law, the PSC has exclusive jurisdiction over utility rates and services, but the court found that argument incorrect.

Within the state law, the court found that the OTMR ordinance fell under a carve-out that allows Louisville to retain jurisdiction over its public rights-of-way as a matter of public safety. The ordinance helps limit traffic disruptions by reducing the number of instances trucks and crews need to tend to pole attachments. The court wrote in its Order:

AT&T narrowly characterizes Ordinance No. 21 as one that regulates pole attachments. But the ordinance actually prescribes the “method or manner of encumbering or placing burdens on” public rights-of-way. … It is undisputed that make-ready work can require blocking traffic and sidewalks multiple times to permit multiple crews to perform the same work on the same utility pole…. The one-touch make-ready ordinance requires that all necessary make-ready work be performed by a single crew, lessening the impact of make-ready work on public rights-of-way. … Louisville Metro has an important interest in managing its public rights-of-way to maximize efficiency and enhance public safety. … And Kentucky law preserves the right of cities to regulate public rights-of-way. … Because Ordinance No. 21 regulates public rights-of-way, it is within Louisville Metro’s constitutional authority to enact the ordinance, and [the state law granting authority to the PSC] cannot limit that authority. 

Federal Jurisdiction

The State Legislature in Indiana sent SB 478 to Governor Eric Holcomb earlier this session; he recently signed the bill into law. Also known as the Facilitating Internet Broadband Rural Expansion (FIBRE) Act, the new law allows electric cooperatives with easements for electric lines to use those same easement for fiber infrastructure. The change in existing law will allow rural electric cooperatives to bring high-quality Internet access to the many rural regions in Indiana that are now unserved or underserved.

Updating Easements For Connectivity

SB 478 applies only to existing easements between electric suppliers and property owners. It doesn’t apply to new electric easements, railroad property, or the installation of new poles, conduit, or other structures. Other exceptions also apply to limit the new easement applications to existing infrastructure. 

The language of the bill provides in detail the steps that a property owner can take if they oppose the installation of the new infrastructure under the purview of an existing easement. It also lays out the information that an electricity provider must provide to the property owner regarding the plan for fiber infrastructure deployment and planned delivery. The bill goes on to establish further procedures if a property owner decides to pursue legal action if they feel their property value is decreased due to the new infrastructure or other related matters.

Lastly, the bill lays out procedural requirements for an electric cooperative that decides to offer broadband Internet. They must create a separate entity and maintain a separate accounting system.

Read the entire bill here.

Learning From The Co-op Guys

Republican State Senator Eric Koch, lead author on the bill, introduced the legislation as part of his ongoing efforts to improve connectivity in Indiana’s rural areas. According to a March article in the Indiana Economic Digest:

Beverly Hills may be known for mansions and upscale shopping, but within a few years, it will also be known for fast, affordable, reliable connectivity. The city is investing in a citywide Fiber-to-the-Premise (FTTP) network for all homes and businesses, including apartments and condos, inside the city.

"90210" Wants Something Better

The city (pop. 35,000) is a little less than six square miles and they receive electricity from Southern California Edison (SCE). AT&T and Spectrum (formerly Time Warner Cable) provide Internet access throughout the community but a 2014 survey as part of the city’s feasibility study indicated that 65 percent of respondents would “definitely or probably” switch to services from the city, if the services were offered. As part of the survey, 25 percent of respondents also want video and voice bundles; 86 percent feel using the Internet at home is important.

While incumbents offer fiber connectivity in commercial areas of Beverly Hills, local businesses report that rates are expensive and they must pay for the cost of construction, which is also a big expense. At a recent City Council meeting when the Council approved funding for the project, the Mayor and Members expressed the need to be an economically competitive city. With Santa Monica, Culver City and Burbank nearby (all communities with municipal networks), Beverly Hills wants to be able to attract businesses looking to relocate or hold on to the businesses that need affordable and reliable gigabit connections.

Nuts And Bolts To Networking

Better conduit policy and One Touch Make Ready (OTMR) are two approaches seeing the state legislative limelight recently. With local examples to offer guidance, a few state lawmakers are attempting to implement similar rules.

State Governments Follow Local Leads

Local communities know their needs best and are best poised to make local decisions. Some have used new conduit policies like in Mount Vernon, Washington. The community's ordinances require developers to install additional conduit during construction and then deed the conduit to the city. The additional expense is minimal and the additional asset makes the property Fiber-to-the-Premise (FTTP) capable, driving up its value. Developers don't consider the ordinance a burden.

Other communities have passed ordinances for OTMR. When Louisville, Kentucky, adopted OTMR to speed up deployment for new entrants, AT&T sued to stop the city, claiming that the FCC had jurisdiction over such decisions. In October 2016, however, the agency let the parties know that Louisville had opted out of federal pole attachment rules at an earlier date. Nashville, Tennessee, passed OTMR also and has also had to deal with incumbent lawsuits.

The overall goal is to make new networks less time-consuming and resource intensive to deploy. It also keeps communities free of constant construction noise and reduces traffic disruption, thereby improving the quality of life during the deployment. When an approach works on the local level, state lawmakers often want to reproduce it on a broader scale.

This is the transcript for Community Broadband Bits Episode 247. Ken Demlow of Newcom Technologies chats with Christopher Mitchell about what happened in Nashville and why poles are important for fiber. Listen to this episode here.

Ken Demlow: There's all that kind of communication that not only can improve what happens in electric and what happens in water, but also just such better communication with your customer, and it's all good stuff.

Lisa Gonzalez: This is episode 247 of the Community Broadband Bits Podcast from the Institute for Local Self-Reliance. I'm Lisa Gonzalez. Ken Demlow, Sales Director of Newcom Technologies joins Christopher this week to talk about several topics. In addition to discussing engineering and design and how it relates to telecommunications networks, Ken shares how Newcom is taking advantage of new technology to offer communities the best results. Christopher and Ken also get into the details of smart-grid and some benefits and uses that you might not necessarily think of right away. The guys spend some time on what happened in Nashville when Ken worked on the Google Fiber project. He shares his inside perspective. You can learn more about Newcom at nucomtech.com. Now, here's Christopher with Ken Demlow from Newcom Technologies talking about engineering and design, smart-grids, and pole drama in Nashville.

Christopher Mitchell: Welcome to another edition of The Community Broadband Bits Podcast. I'm Chris Mitchell. Today, I'm speaking with Ken Demlow, the sales director of Newcom Technologies. Welcome to the show.

Ken Demlow: Thank you. Good to be here.

Christopher Mitchell: Ken you're one of my favorite people at these trade shows. We're here at the Iowa Association of Municipal Utilities, and as you know, I contrived an excuse to have you on because I think you're a fun person to talk to.

Ken Demlow: Thank you. That's better than I deserve, but thank you.

Christopher Mitchell: I think we're going to start with just a brief explanation of what Newcom Technologies does.