With the best intentions, Kentucky announced in late 2014 that it would build out a statewide open access fiber optic network to at least one location in each county to encourage high-quality connectivity in both urban and rural communities. Hopes were high as rural residents and businesses that depended on DSL and dial-up envisioned connectivity to finally bring them into the 21st century. After almost three years and multiple issues that have negatively impacted the project, legislators and everyday folks are starting to wonder what's in store for the KentuckyWired project. 

Local Communities Are Best Suited To Deploy Community Networks

There is no one-size-fits-all method of deploying across a state filled with communities and landscapes as diverse as Kentucky. From the urban centers like Louisville and Lexington to the rocky, mountainous terrain in the southeastern Appalachian communities, demographics and geography vary widely. But most lack modern Internet access and local ISPs have found it hard to get affordable backhaul to connect to the rest of the Internet.

There are several municipal networks in Kentucky, some of which have operated for decades. In addition to Glasgow, Paducah, Bowling Green, Frankfort, and others, Owensboro is currently expanding a pilot project that proved popular. As our own Christopher Mitchell discussed at the Appalachia Connectivity Summit, several cooperatives have made major fiber-optic investments in the state.

When it comes to connecting residents and local businesses, we strongly believe local entities are the best choice. Local officials have a better sense of rights-of-way, the challenges of pole attachments, and the many other moving pieces that go into network investment. Projects with local support see fewer barriers - people are more willing to grant easements, for instance. 

This is the transcript for Episode 271 of the Community Broadband Bits Podcast. Research Associate Hannah Trostle takes over as host in order to quiz Christopher Mitchell on the latest developments in community networks. Listen to this episode here.

Christopher Mitchell: I can't believe we're freek'n talking about satellite again!

Lisa Gonzalez:This is Episode 271 of the community broadband bits podcast from the Institute for Local Self-Reliance. I'm Lisa Gonzalez. What do the FCC satellite internet access mobile broadband. Madison, Wisconsin, and utility poles in Louisville, Kentucky, have in common. They're all in the recent community broadband news and they're all in this week's podcast. In this episode, Research Associate Hannah Trostle boots Christopher from the host chair to interview him about some significant recent developments. For more details on these and other topics check out the appropriate tags at MuniNetworks.org. Now, here's Hannah and Christopher.

Hannah Trostle: Welcome to the Community Broadband Bits podcast. This is your host this week Hannah Trostle. Joining me is the normal host Christopher Mitchell.

Christopher Mitchell: I don't know how normal I am but thank you for having me on my show.

Hannah Trostle: Now we're going to kick you off, and I'm only going to do the podcast from now on.

Christopher Mitchell: I can't say I don't deserve it.

Hannah Trostle: Well you've been gone quite a bit. Where have you been?

Louisville has overcome a tall hurdle in its efforts to bring better connectivity and more competition to the community through local control. On August 16th the U.S. District Court for the Western District of Kentucky supported the city’s one touch make ready (OTMR) ordinance. AT&T challenged the ordinance in court, but their arguments fell flat and court confirmed that the city has the authority to manage its rights-of-way with OTMR.

State Law

AT&T’s claim based on state law asserted that the city was overstepping its authority by enacting the OTMR ordinance because it was impinging on Kentucky Public Service Commission jurisdiction. AT&T attorneys argued that, according to state law, the PSC has exclusive jurisdiction over utility rates and services, but the court found that argument incorrect.

Within the state law, the court found that the OTMR ordinance fell under a carve-out that allows Louisville to retain jurisdiction over its public rights-of-way as a matter of public safety. The ordinance helps limit traffic disruptions by reducing the number of instances trucks and crews need to tend to pole attachments. The court wrote in its Order:

AT&T narrowly characterizes Ordinance No. 21 as one that regulates pole attachments. But the ordinance actually prescribes the “method or manner of encumbering or placing burdens on” public rights-of-way. … It is undisputed that make-ready work can require blocking traffic and sidewalks multiple times to permit multiple crews to perform the same work on the same utility pole…. The one-touch make-ready ordinance requires that all necessary make-ready work be performed by a single crew, lessening the impact of make-ready work on public rights-of-way. … Louisville Metro has an important interest in managing its public rights-of-way to maximize efficiency and enhance public safety. … And Kentucky law preserves the right of cities to regulate public rights-of-way. … Because Ordinance No. 21 regulates public rights-of-way, it is within Louisville Metro’s constitutional authority to enact the ordinance, and [the state law granting authority to the PSC] cannot limit that authority. 

Federal Jurisdiction

One Touch Make Ready (OTMR) policies are recognized as a way to cut down on the expense and the time it takes to deploy fiber optic networks. At least three sizable urban communities have adopted OTMR practices to streamline fiber optic construction and ensure consistent standards. For other communities looking at ways to encourage brisk fiber optic investment, it pays to study the language of OTMR resolutions and policies.

OTMR allows a pre-approved contractor to move cables belonging to more than one entity on one visit to the pole to make room for the new fiber optic cable. This is a departure from the old method, in which each entity takes turns visiting the pole in question to move only their wires. The old approach is time consuming because each entity must take turns in the order in which their wires are installed on the poles. If one entity causes a delay, every other entity that needs to work after them must also wait. What follows is a snowball effect and an entire project can fall far behind schedule.

San Antonio, Texas

San Antonio’s municipal utility, CPS Energy, adopted a broad set of pole attachment standards that include specific requirements for OTMR, including what needs to happen before, during, and after the process.

The standards lay out administrative procedures, technical provisions, and specific provisions for both wired and wireless attachments. It incorporates recommendations from the FCC on how best to expand broadband while also weaving in safety standards from the Occupational Safety and Health Administration (OSHA). In the introduction, CPS Energy writes:

From a holistic perspective, the Standards seek to balance the competing needs and interests of multiple communications providers to access and utilize CPS Energy Poles, while at the same time recognizing that the core purpose and function of these Poles is for CPS Energy’s safe and reliable distribution and delivery of electric services to CPS Energy customers. Hence, any use of CPS Energy’s Poles must at all times ensure the continued operational integrity, safety and reliability of CPS Energy’s Facilities, electric services, personnel and the general public.

The State Legislature in Indiana sent SB 478 to Governor Eric Holcomb earlier this session; he recently signed the bill into law. Also known as the Facilitating Internet Broadband Rural Expansion (FIBRE) Act, the new law allows electric cooperatives with easements for electric lines to use those same easement for fiber infrastructure. The change in existing law will allow rural electric cooperatives to bring high-quality Internet access to the many rural regions in Indiana that are now unserved or underserved.

Updating Easements For Connectivity

SB 478 applies only to existing easements between electric suppliers and property owners. It doesn’t apply to new electric easements, railroad property, or the installation of new poles, conduit, or other structures. Other exceptions also apply to limit the new easement applications to existing infrastructure. 

The language of the bill provides in detail the steps that a property owner can take if they oppose the installation of the new infrastructure under the purview of an existing easement. It also lays out the information that an electricity provider must provide to the property owner regarding the plan for fiber infrastructure deployment and planned delivery. The bill goes on to establish further procedures if a property owner decides to pursue legal action if they feel their property value is decreased due to the new infrastructure or other related matters.

Lastly, the bill lays out procedural requirements for an electric cooperative that decides to offer broadband Internet. They must create a separate entity and maintain a separate accounting system.

Read the entire bill here.

Learning From The Co-op Guys

Republican State Senator Eric Koch, lead author on the bill, introduced the legislation as part of his ongoing efforts to improve connectivity in Indiana’s rural areas. According to a March article in the Indiana Economic Digest:

Better conduit policy and One Touch Make Ready (OTMR) are two approaches seeing the state legislative limelight recently. With local examples to offer guidance, a few state lawmakers are attempting to implement similar rules.

State Governments Follow Local Leads

Local communities know their needs best and are best poised to make local decisions. Some have used new conduit policies like in Mount Vernon, Washington. The community's ordinances require developers to install additional conduit during construction and then deed the conduit to the city. The additional expense is minimal and the additional asset makes the property Fiber-to-the-Premise (FTTP) capable, driving up its value. Developers don't consider the ordinance a burden.

Other communities have passed ordinances for OTMR. When Louisville, Kentucky, adopted OTMR to speed up deployment for new entrants, AT&T sued to stop the city, claiming that the FCC had jurisdiction over such decisions. In October 2016, however, the agency let the parties know that Louisville had opted out of federal pole attachment rules at an earlier date. Nashville, Tennessee, passed OTMR also and has also had to deal with incumbent lawsuits.

The overall goal is to make new networks less time-consuming and resource intensive to deploy. It also keeps communities free of constant construction noise and reduces traffic disruption, thereby improving the quality of life during the deployment. When an approach works on the local level, state lawmakers often want to reproduce it on a broader scale.

This is the transcript for Community Broadband Bits Episode 247. Ken Demlow of Newcom Technologies chats with Christopher Mitchell about what happened in Nashville and why poles are important for fiber. Listen to this episode here.

Ken Demlow: There's all that kind of communication that not only can improve what happens in electric and what happens in water, but also just such better communication with your customer, and it's all good stuff.

Lisa Gonzalez: This is episode 247 of the Community Broadband Bits Podcast from the Institute for Local Self-Reliance. I'm Lisa Gonzalez. Ken Demlow, Sales Director of Newcom Technologies joins Christopher this week to talk about several topics. In addition to discussing engineering and design and how it relates to telecommunications networks, Ken shares how Newcom is taking advantage of new technology to offer communities the best results. Christopher and Ken also get into the details of smart-grid and some benefits and uses that you might not necessarily think of right away. The guys spend some time on what happened in Nashville when Ken worked on the Google Fiber project. He shares his inside perspective. You can learn more about Newcom at nucomtech.com. Now, here's Christopher with Ken Demlow from Newcom Technologies talking about engineering and design, smart-grids, and pole drama in Nashville.

Christopher Mitchell: Welcome to another edition of The Community Broadband Bits Podcast. I'm Chris Mitchell. Today, I'm speaking with Ken Demlow, the sales director of Newcom Technologies. Welcome to the show.

Ken Demlow: Thank you. Good to be here.

Christopher Mitchell: Ken you're one of my favorite people at these trade shows. We're here at the Iowa Association of Municipal Utilities, and as you know, I contrived an excuse to have you on because I think you're a fun person to talk to.

Ken Demlow: Thank you. That's better than I deserve, but thank you.

Christopher Mitchell: I think we're going to start with just a brief explanation of what Newcom Technologies does.

On March 24th, Christopher was on episode 232 of the web show "This Week in Enterprise Tech." Christopher discussed the future of community broadband networks in the Trump era as well as shared information about the models of successful networks across the country.

Christopher begins his discussion of these issues at 29:45 with host Friar Robert Ballecer and guest co-hosts Lou Maresca and Brian Chee. Throughout the show, the group covers the beginning of the FCC Chairmanship of Ajit Pai, how the Senate is legislating against Internet privacy regulations, and how community networks are pushing ahead to achieve better connectivity for local businesses and residents.

The folks at TWiT.tv share excerpts from our video on Ammon, Idaho, and the guys get into a deeper discussion about the possibilities of local empowerment from community networks.

You can stream the episode at TWiT.tv, or watch here: